Hyundai Elantra: Audio Remote control. Repair procedures - Audio - Body Electrical System - Hyundai Elantra HD 2006Ц2010 Service ManualHyundai Elantra: Audio Remote control. Repair procedures


Inspection

1.
Check for resistance between No.6 and No.7 terminals in each switch position.

Switch
Connector
terminal
Resistance
(±5%)
VOLUME DOWN
6 - 7
6.81 kΩ
VOLUME UP
6 - 7
4.61 kΩ
MODE
6 - 7
2.11 kΩ
SEEK DOWN
6 - 7
1.11 kΩ
SEEK UP
6 - 7
430 Ω


Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the Airbag group - Airbag module and cluck spring).

3.
Remove the audio remote control switch (A) and airbag connector (B).

4.
Remove the steering wheel after loosening the nuts.
(Refer to the Steering group - Steering column and shaft).
5.
Loosen the screws (2EA) on the opposite side of the steering wheel.

6.
Remove the audio remote control switch (A) after disconnecting the switch connector.


Installation

1.
Install the audio remote control switch on the steering wheel.
2.
Install the steering wheel.
3.
Connect the audio remote control switch connector and airbag connector.
4.
Install the driver airbag module.
(Refer to the Airbag group).