Hyundai Elantra HD: Transaxle Oil Temperature Sensor. Repair procedures (A4CF2) - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Transaxle Oil Temperature Sensor. Repair procedures (A4CF2)

Removal

1.
Remove the battery terminal.
2.
Lift the vehicle.
3.
Remove the under cover.
4.
Loosen the drain plug and drain the transaxle oil.
5.
Remove the oil pan. (Refer to Automatic transaxle's disassembly in 'A4CF2' overhaul manual)
6.
Remove the oil filter.
7.
Remove the valve body. (Refer to Valve body's disassembly in 'A4CF2' overhaul manual)
8.
Disconnect the main harness connector (A) from the valve body.


Installation

1.
Connect the main harness connector (A) to the valve body.
When connecting the oil temperature connector, check the connector for rust, dirt, or oil, then reconnect it.

2.
Install the valve body. (Refer to Valve body's reassembly in 'A4CF2' overhaul manual)

Tightening torque :
10~12Nm(1.0~1.2kgf.m, 7~8lb-ft)

3.
Install the oil filter.

Tightening torque :
5~7Nm(0.5~0.7kgf.m, 4~5lb-ft)

4.
Continue to apply liquid gasket at application points at the oil pan with Ø0.098in(2.5mm) thickness.

Liquid gasket Part name : Threebond 1281B

5.
Tighten the mounting bolt with the specified TORQUE after installing the oil pan.

Tightening torque :
10~12Nm(1.0~1.2kgf.m, 7~8lb-ft)

6.
Install the drain plug.

Tightening torque :
35~45Nm(3.5~4.5kgf.m, 25~32lb-ft)

7.
Installation is the reverse of the removal.

Transaxle Oil Temperature Sensor. Description and Operation (A4CF2)
Description Sensor type 1. Type : Thermister 2. Use available temperature :-40~160°C(-40~320°F) ...

Inhibiter Switch. Description and Operation (A4CF2)
Description Sensor type 1. Type : Rotary 2. Available temperature range : -40~150°C(-40~320°F) ...