Hyundai Elantra MD/UD: Removal - Brake Pedal. Repair procedures - Brake System - Brake System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to the Body group - "Crash Pad")
3.
Remove the shower duct (A).

4.
Disconnect the stop lamp switch connector (A), and than remove stop lamp switch.

5.
Remove the brake pedal member mounting bolt (A).
6.
Remove the snap pin (A) and clevis pin (B).

7.
Remove the brake pedal member assembly mounting nuts and then remove the brake pedal assembly.


Inspection
1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...