Hyundai Elantra: Removal - Variable Charge Motion Actuator (VCMA). Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the VCMA connector (A).

3.
Remove the VCMA (A) after removing 3 installation bolts.


    Inspection
    1. Turn ignition switch OFF. 2. Disconnect the VCMA connector. 3. Check that the VCMA is not stuck by foreign ...

    Installation
    • Install the component with the specified torques. • ...