Hyundai Elantra HD: Output Speed Sensor. Description and Operation (A4CF2) - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Output Speed Sensor. Description and Operation (A4CF2)

Description

Sensor type
1.
Type : Hall Sensor
2.
Output voltage : DC 12V
3.
Current consumption : 22mA (Max)
Function
1.
Output shaft speed sensor : Detect the output shaft rpm(T/F DRIVE GEAR RPM) at the T/F drive gear
2.
Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector


Item
Inspection item
Standard value
Air gap
Output shaft speed sensor
0.025in(0.65mm)
Sensor resistance
Output shaft speed sensor
Over 1 MΩ
Output voltage
HIGH
Over 4.8V
LOW
Below 0.8V


Input Speed Sensor. Repair procedures (A4CF2)
Removal 1. Remove the battery terminal. 2. Remove the battery and battery tray. 3. Remove the air duct. ...

Output Speed Sensor. Repair procedures (A4CF2)
Removal 1. Remove the battery terminal. 2. Remove the battery and battery tray. 3. Remove the air duct. ...