Hyundai Elantra HD: Body Control Module (BCM). Specifications
Specifications
|
Item |
Requirement |
Remark |
|
Rated voltage |
DC 12V |
Shall activate normally in these range. |
|
Operating voltage range |
DC 9 ~ 16V |
|
|
Operating temperature range |
-30°C ~ +80°C |
|
|
storage temperature range |
-40°C ~ +85°C |
|
|
Max humidity in use |
95% |
|
|
High voltage resistance |
24V |
|
|
Insulation resistance |
100Mohm or more (measured with 500V MEGGER) |
Specify as well as parts that insulation like PCB, moisture-proof
COATING is required |
|
Dark Current |
Max 4mA (KEYLESS) Max 3mA (NON-KEYLESS) |
Measure when the state, all output loads are OFF and
there are no Input SW(including TX operation) changes, continues 2sec. |
|
Voltage drop |
1.2V or less |
Output terminals for TAIL LAMP RELAY, DRL, POWER WINDOW
RELAY, SAFETY POWER WINDOW, BURGLAR ALARM RELAY shall be 2.0V or less |
Rated Load
|
Item |
Rated load |
|
Room lamp |
DC 12V 21W (LAMP load) |
|
Key hole illumination |
DC 12V 2W (LAMP load) |
|
Seat belt indicator |
DC 12V 1.2W (LED load) |
|
Door lock relay |
DC 12V 200mA (Inductive load) |
|
Door unlock relay |
DC 12V 200mA (Inductive load) |
|
Drive door unlock relay |
DC 12V 200mA (Inductive load) |
|
Hazard relay |
DC 12V 200mA (Inductive load) |
|
Start inhibit relay |
DC 12V 200mA (Inductive load) |
|
Power window relay |
DC 12V 200mA (Inductive load) |
|
Wiper relay |
DC 12V 200mA (Inductive load) |
|
Defogger relay |
DC 12V 200mA (Inductive load) |
|
Trunk release relay |
DC 12V 200mA (Inductive load) |
|
Tail lamp relay |
DC 12V 200mA (Inductive load) |
|
Head lamp relay |
DC 12V 200mA (Inductive load) |
|
Front deicer relay |
DC 12V 200mA (Inductive load) |
|
Horn relay |
DC 12V 200mA (Inductive load) |
