Hyundai Elantra HD: Windshield Wiper-Washer Switch. Repair procedures - Windshield Wiper/Washer - Body Electrical System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Windshield Wiper-Washer Switch. Repair procedures

Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after loosening 3 screws.

3.
Remove the wiper switch (A) after disconnecting the connector with pushing the lock pin (B) and loosening 2 screws.


Installation

1.
Install the windshield wiper switch.
2.
Connect the wiper switch connector.
3.
Install the steering column upper and lower shrouds.

Inspection

1.
Multifunction switch operates head lamps and wiper by communicating with BCM through LIN communication.
2.
Check BCM input/output value of each position of multifunction switch when you inspect the module whether faulty or not.
3.
Select model and BCM menu.

4.
Select "Current data" and wiper.

5.
Check input/output value of washer & wiper switch.


Components and Components Location
Component Location 1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose 4. Windshield wiper motor & linkage 5. Washer ...

Front Wiper Motor. Repair procedures
Removal 1. Remove the windshield wiper arm and blade after removing a nut (A). 2. Remove the weather strip and the cowl top cover ...