Hyundai Elantra: Troubleshooting - General Information - Manual Transaxle System - Hyundai Elantra HD 2006Ц2010 Service ManualHyundai Elantra: Troubleshooting


Troubleshooting

Symptom
Probable cause
Remedy
Vibration, noise
Loose or damaged transaxle and engine mounts
Tighten or replace mounts
Inadequate shaft end play
Correct end play
Worn or damaged gears
Replace gears
Inadequate grade of oil
Replace with specified oil
Low oil level
Replenish
Inadequate engine idle speed
Adjust idle speed
Oil leakage
Broken or damaged, oil seal or O-ring
Replace control cable oil seal or O-ring
Hard shift
Faulty control cable
Replace control cable
Poor contact or wear of synchronizer ring and gear cone
Correct or replace
Weakened synchronizer spring
Replace synchronizer spring
Inadequate grade of oil
Replace with specified oil
Jumps out of gear
Worn gear shift fork or broken poppet spring
Replace shift fork or poppet spring
Synchronizer hub-to-sleeve spline clearance too large
Replace synchronizer hub and sleeve


    Special Service Tools
    Special Service Tools Tool (Number and Name) Illustration Use 9200-38001 Engine support fixture Removal and inst ...