Hyundai Elantra HD: TPMS Receiver. Repair procedures - Tire Pressure Monitoring System - Suspension System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: TPMS Receiver. Repair procedures

Replacement

When the receiver first arrives for replacement:
1)
It will be in Virgin State.
2)
It will not be configured for any specific platform.
3)
It will not have any sensor ID's memorized.
1.
Disconnect vehicle battery.
2.
Remove malfucntioning part and replace new part.

(1)
Installation is the reverse of removal.
-
Make sure the connector are plugged in properly.
3.
Re-connect battery and turn Ignition on.
4.
Check that TPMS lamp flash rate matches Virgin State indication.
5.
Connect 'TPMS exciter' to the diagnostic connector.
6.
Write vehicle name to receiver. receiver will now automatically update monitoring parameters.
7.
Read sensor's ids with the 'TPMS exciter'. (Refer to 'SENSOR INITIATING PROCEDURE')
8.
Register sensor's ids to receiver.
9.
Register VIN number of the vehicle.(17 digits)
10.
Change receiver state from Virgin to Normal.
11.
Disconnect diagnostic link.
12.
Turn ignition off for approximately 10 seconds then turn it back on and check that Normal State is now indicated.

TPMS Receiver. Description and Operation
Description Receiver 1. Mode (1) Virgin State (No TPMS sensor id's learned) A. The ...