Hyundai Elantra: Reprogramming a single HomeLink button - Mirrors - Features of your vehicle - Hyundai Elantra HD 20062010 Owners ManualHyundai Elantra: Reprogramming a single HomeLink button


To program a device to HomeLink using a HomeLink button previously trained, follow these steps:

1. Press and hold the desired HomeLink button. Do NOT release until step 4 has been completed.

2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 1 to 3 inches away from the HomeLink surface.

3. Press and hold the hand-held transmitter button (or press and cycle - as described in Canadian Programming above).

4. The HomeLink indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.

The previous device has now been erased and the new device can be activated by pushing the HomeLink button that has just been programmed.This procedure will not affect any other programmed HomeLink buttons.

    Erasing programmed HomeLink buttons
    To erase the three programmed buttons (individual buttons cannot be erased): Press and hold the left and center buttons simultaneously, until the indicator light begins to flash (approximately ...

    Gate operator programming & canadian programming
    During programming, your hand-held transmitter may automatically stop transmitting. Continue to press and hold the HomeLink button (note steps 2 through 4 in the Programming portion of this text ...