Hyundai Elantra MD/UD: Replacement - General Information - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Replacement

Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced with new ones.
1.
Oil seals
2.
Gaskets
3.
O-rings
4.
Lock washers
5.
Cotter pins (split pins)
6.
Plastic nuts

Depending on their location.
7.
Sealant should be applied to gaskets.
8.
Oil should be applied to the moving components of parts.
9.
Specified oil or grease should be applied to the prescribed locations (oil seals, etc) before assembly.

Adjustment

Use gauges and testers to adjust correctly the parts to standard values correctly.
Parts
When replacing parts, use HYUNDAI genuine parts. ...

Electrical System
1. Be sure to disconnect the battery cable from the negative (-) terminal of the battery. 2. Never pull on the wires when disconnecting con ...