| •
|
Put on gloves to protect your hands.
|
| •
|
Be careful not to damage the painted surface.
|
|
|
1. |
Remove the following items.
| A. |
Rear seat
(Refer to the BD group- "Rear Seat")
|
| B. |
Rear pillar trim
(Refer to the BD group- "Interior Trim")
|
| C. |
Rear door scuff trim
(Refer to the BD group- "Interior Trim")
|
| D. |
Luggage partition trim
(Refer to the BD group- "Interior Trim")
|
| E. |
Rear wheel house trim
(Refer to the BD group- "Interior Trim")
|
| F. |
Package tray trim
(Refer to the BD group- "Interior Trim")
|
| G. |
Rear window glass heater connector
(Refer to the BE group - "Rear window defogger")
|
|
|
2. |
Spread the WD-40 on the side of rear window glass.
|
|
3. |
Cut out the adhesive using the cutter (A).
|
• |
Please use the cutter with a blade length between
8-12 inches.
|
|
|
|
4. |
Enough on the upper (A) and lower (B) side (C) of rear window
glass. and then cut out the adhesive using the cutter tool (09861-31100).
|
|
5. |
Remove the rear window glass (A).
|
• |
When removing and installing the rear window glass,
an assistant is necessary.
|
|
|
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire rear window
glass opening flange :
...
Hyundai Elantra MD/UD: Removal
