Hyundai Elantra: Removal - SRS Control Module (SRSCM). Repair procedures - SRSCM - Restraint - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console.
(Refer to the Body group - "Console")
4.
Remove the rear heating joint duct (A).

5.
Pull up the lock, of the SRSCM connector, the disconnect the connector (A).

6.
Remove the SRSCM mounting bolts (3EA) from the SRSCM, then remove the SRSCM.

    Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...