Hyundai Elantra: Removal - Clutch Master Cylinder. Repair procedures - Clutch System - Clutch System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
1.
Disconnect the push rod from the master cylinder by removing the snap pin (A) and washer (B).

2.
Remove the battery and ECM. (Refer to "Manual transaxle system" in MT group)
3.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.

4.
Remove the clutch master cylinder assembly (A) by turning it clockwise.


    Installation
    1. Installation is the reverse of removal. • ...