Hyundai Elantra: Removal - Accelerator Pedal. Repair procedures - Fuel Delivery System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).

3.
Remove the installation bolt (B), the nuts (C) and then remove the accelerator pedal module.


    Installation
    1. Installation is reverse of removal. Accelerator pedal module installation nut: 12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb- ...