Hyundai Elantra: Removal - Starter. Repair procedures - ISG (Idle Stop & Go) System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Disconnect the battery negative (-) cable.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Engine And Transaxle Assembly")
3.
Disconnect the starter cable (A) from the B terminal on the solenoid then disconnect the connector (B) from the S terminal.

Tighting torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

4.
Remove the 2 bolts holding the starter, then remove the starter (A).

Tighting torque :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)


    Installation
    1. Install in the reverse of removal. ...