Hyundai Elantra MD/UD: Removal - DC/DC Converter. Repair procedures - ISG (Idle Stop & Go) System - Fuel System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

[200W]
1.
Disconnect the battery negative (-) cable.
2.
Remove the crash pad lower panel.
(Refer to Body - Crash pad lower panel.)
3.
Disconnect the DC/DC converter connector (A).

4.
Remove the DC/DC converter (A).

[400W]
1.
Disconnect the battery negative (-) cable.
2.
Remove the crash pad lower panel.
(Refer to Body - Crash pad lower panel.)
3.
Disconnect the oil pump unit connector (A) and the DC/DC converter connector (B).
4.
Remove the oil pump unit (C) and the DC/DC converter (D).


Installation
1. Install in the reverse order of removal. If the battery negative (-) cable ...