Hyundai Elantra: Removal - AGM Battery. Repair procedures - ISG (Idle Stop & Go) System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Remove the battery.
(1)
Disconnect the battery terminals (A).

Tightening torque
(+) terminal :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
(-) terminal (without battery sensor) :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
(-) terminal (with battery sensor) :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)

2.
Remove the air duct and air cleaner assembly. (Refer to EM group).
3.
Remove the battery insulation pad.
4.
Remove the battery (A) after removing the mounting bracket.

Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

5.
Remove the ECM (B) and the battery tray (C) after disconnecting the ECM connector (A).

Tightening torque
ECM bracket bolts & nut :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Battery tray bolts :
8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1lb-ft)


    Adjustment
    Battery charging In general, vehicle battery charging system has three forms. 1. Constant current charge: The battery voltage gradually rises by chargi ...

    Installation
    1. Install in the reverse order of removal. When installing the battery, fix t ...