Hyundai Elantra: Removal - Purge Control Solenoid Valve (PCSV). Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the purge control solenoid valve connector (A).
3.
Disconnect the vapor hoses (B) from the purge control solenoid valve.
4.
Remove the valve (C) from the surge tank after pulling it.


    Inspection
    1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

    Installation
    • Install the component with the specified torques. • ...