Hyundai Elantra MD/UD: Removal - Fuel Tank Pressure Sensor (FTPS). Repair 
procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the rear seat (Refer to "Seat" in BD group).
3.
Remove the fuel pump service cover (A).

4.
Disconnect the fuel tank pressure sensor connector (A).
5.
Remove the fuel tank pressure sensor (B) after releasing the hooks vertically.


Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...

Installation
• Install the component with the specified torques. • ...