Hyundai Elantra: Removal - Knock Sensor (KS). Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).

3.
Remove the intake manifold (Refer to Intake And Exhaust System in EM group).
4.
Remove the installation bolt (A), and then remove the sensor from the cylinder block.


    Installation
    Install the component with the specified torques. ...