Hyundai Elantra: Removal - DC DC Converter. Repair procedures - Charging System - Engine Electrical System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Removal


[200W]
1.
Disconnect the battery negative (-) cable.
2.
Remove the crash pad lower panel.
(Refer to Body - Crash pad lower panel.)
3.
Disconnect the DC/DC converter connector (A).

4.
Remove the DC/DC converter (A).

[400W]
1.
Disconnect the battery negative (-) cable.
2.
Remove the crash pad lower panel.
(Refer to Body - Crash pad lower panel.)
3.
Disconnect the oil pump unit connector (A) and the DC/DC converter connector (B).
4.
Remove the oil pump unit (C) and the DC/DC converter (D).


    Installation
    1. Install in the reverse order of removal. If the battery negative (-) cable ...