Hyundai Elantra: Reassembly - Front Driveshaft. Repair procedures - Driveshaft Assembly - Driveshaft and axle - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Reassembly


1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots.
2.
Apply grease to the joint boot on the side of the wheel and install the boot.
3.
Install the clamp.

4.
Assemble the transaxle side joint boot and bands.
5.
Using the alignment marks (D) made during disassembly as a guide, install the spider assembly (A) and snap ring (B) on the driveshaft splines (C).

6.
Add specified grease to the joint boot as much as it was wiped away at inspection.
7.
Install the both boot band.

    Disassembly
    • Do not disassemble the BJ assembly. • Special g ...