Hyundai Elantra: Reassembly - Front Hub / Knuckle. Repair procedures - Front Axle Assembly - Driveshaft and axle - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Reassembly


1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
Lay a new hub bearing upon the knuckle assembly (A).
(3)
Lay a suitable adapter (B) upon the hub bearing.
(4)
Install the hub bearing to the knuckle assembly by using press.

-
Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
-
Always use a new wheel bearing assembly.
2.
Install the dust cover (A).

3.
Install the hub assembly to the knuckle assembly.
(1)
Lay the hub assembly (A) upon a suitable adapter (B).
(2)
Lay the knuckle assembly (C) upon the hub assembly (A).
(3)
Lay a suitable adapter (D) upon the hub bearing.
(4)
Install the hub assembly (A) to the knuckle assembly (C) by using press.

Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
4.
Install the snap ring (A).


    Disassembly
    1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the ...

    Inspection
    1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...