Hyundai Elantra: Reassembly - Alternator. Repair procedures - Charging System - Engine Electrical System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Reassembly


1.
Reassemble in the reverse order of disassembly.
When reassembling OAD pulley, replace with new OAD cap.

    Disassembly
    1. Remove the rear cover (A) after removing nuts (B). 2. Remove the mounting bolts (A) and the regulator assembly (B). ...

    Inspection
    [Rotor] 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip ...