Hyundai Elantra: Installation - Manifold Absolute Pressure Sensor (MAPS). Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Installation


Х
Install the component with the specified torques.
Х
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
Х
Insert the sensor in the installation hole and be careful not to damage when installation.
1.
Installation is reverse of removal.

Manifold absolute pressure sensor installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)


    Removal
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor connecto ...

    Intake Air Temperature Sensor (IATS). Description and Operation
    Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction o ...