Hyundai Elantra: Installation - ETC (Electronic Throttle Control) System. Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Installation


Х
Install the component with the specified torques.
Х
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
1.
Installation is reverse of removal.

Electronic throttle body Installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)


    Removal
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to УI ...

    Manifold Absolute Pressure Sensor (MAPS). Description and Operation
    Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...