Hyundai Elantra: Inspection - SS-B Solenoid 
Valve(ON/OFF). Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Inspection


1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
(Refer to SS-B Solenoid Valve - "Specifications")

    Removal
    1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...