Hyundai Elantra: Input Speed Sensor. Description and Operation (A4CF2) - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Elantra HD 2006Ц2010 Service ManualHyundai Elantra: Input Speed Sensor. Description and Operation (A4CF2)


Description

Sensor type
1.
Type : Hall Sensor
2.
Operating voltage : DC 12V
3.
Current consumption : 22mA (Max)
Function
1.
Input shaft speed sensor: Detect the input shaft rotation at the OD & REV retainer side to control oil pressure when shifting.
2.
Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector


Item
Inspection item
Standard value
Air gap
Input shaft speed sensor
0.035in(0.9mm)
Sensor resistance
Input shaft speed sensor
Over 1 MΩ
Output voltage
HIGH
Over 4.8V
LOW
Below 0.8V


    Shift Lever. Repair procedures (A4CF2)
    Removal 1. Remove the shift lever knob (A). 2. Remove the center console cover (A). 3. Remove ...

    Input Speed Sensor. Repair procedures (A4CF2)
    Removal 1. Remove the battery terminal. 2. Remove the battery and battery tray. 3. Remove the air duct. ...