Hyundai Elantra MD/UD: Immobilizer Control Unit. Repair procedures - Immobilizer System - Body Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Immobilizer Control Unit. Repair procedures

Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening the bolt.
[USA]

4.
Disconnect the immobilizer unit connector and then remove the immobilizer unit(A) and bracket. Remove the immobilizer unit from the bracket(B).
-
Be careful not to damage the SMARTRA unit.
[CANADA]

5.
Installation is the reverse of removal procedure.

Replacement
Problems And Replacement Parts: Problem Part set GDS required? All keys have been lost Blank key (4) YES An ...

Antenna Coil. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after loosening the ...