Hyundai Elantra: General Tightening Torque Table - General InformationHyundai Elantra: General Tightening Torque Table

General Information

BOLT (Nominal diameter)
NUT (Nominal diameter)


BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.8 (0.031)
2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2)
4.9 ~ 6.9 (0.5 ~ 0.7, 3.6 ~ 5.1)
7.8 ~ 10.8 (0.8 ~ 1.1, 5.8 ~ 8.0)
M6
1 (0.039)
2.9 ~ 4.9 (0.3 ~ 0.5, 2.2 ~ 3.6)  
8.8 ~ 12.7 (0.9 ~ 1.3, 6.5 ~ 9.4)  
13.7 ~ 18.6 (1.4 ~ 1.9, 10.1 ~ 13.7)
M8
1.25 (0.049)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
22.6 ~ 30.4 (2.3 ~ 3.1, 16.6 ~ 22.4)  
33.3 ~ 44.1 (3.4 ~ 4.5, 24.6 ~ 32.5)
M10
1.5 (0.059)
16.7 ~ 22.6 (1.7 ~ 2.3, 12.3 ~ 16.6)
45.1 ~ 60.8 (4.6 ~ 6.2, 33.3 ~ 44.8)
65.7 ~ 88.3 (6.7 ~ 9.0, 48.5 ~ 65.1)
M12
1.75 (0.068)
29.4 ~ 39.2 (3.0 ~ 4.0, 21.7 ~ 28.9)
78.5 ~ 105.9 (8.0 ~ 10.8, 57.9 ~ 78.1)
114.7 ~ 154.9 (11.7 ~ 15.8, 84.6 ~ 114.3)
M14
2 (0.078)
47.1 ~ 63.7 (4.8 ~ 6.5, 34.7 ~ 47.0)
125.5 ~ 169.7 (12.8 ~ 17.3, 92.6 ~ 125.1)
183.4 ~ 249.1 (18.7 ~ 25.4, 135.3 ~ 183.7)
M16
2 (0.078)
73.5 ~ 100.0 (7.5 ~ 10.2, 54.2 ~ 73.8)
197.1 ~ 266.7 (20.1 ~ 27.2, 145.4 ~ 196.7)
288.3 ~ 390.3 (29.4 ~ 39.8, 212.7 ~ 287.9)
M20
2.5 (0.098)
144.2 ~ 195.2 (14.7 ~ 19.9, 106.3 ~ 143.9)
396.2 ~ 535.4 (40.4 ~ 54.6, 292.2 ~ 394.9)
565.8 ~ 764.9 (57.7 ~ 78.0, 417.3 ~ 564.2)
M24
3 (0.118)
249.1 ~ 337.3 (25.4 ~ 34.4, 183.7 ~ 248.8)
687.4 ~ 929.7 (70.1 ~ 94.8, 507.0 ~ 685.7)
975.8 ~ 1320.0 (99.5 ~ 134.6, 719.7 ~ 973.6)
M30
3.5 (0.137)
499.2 ~ 674.7 (50.9 ~ 68.8, 368.2 ~ 497.6)
1372.9 ~ 1858.4 (140.0 ~ 189.5, 1012.6 ~ 1370.7)
1956.4 ~ 2647.8 (199.5 ~ 270.0, 1443.0 ~ 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.5 (0.019)
2.0 ~ 3.0 (0.2 ~ 0.3, 1.4 ~ 2.2)
5.9 ~ 8.8 (0.6 ~ 0.9, 4.3 ~ 6.5)
8.8 ~ 12.7 (0.9 ~ 1.3, 6.5 ~ 9.4)
M6
0.75 (0.029)
3.9 ~ 4.9 (0.4 ~ 0.5, 2.9 ~ 3.6)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
14.7 ~ 20.6 (1.5 ~ 2.1, 10.8 ~ 15.2)
M8
1 (0.039)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
24.5 ~ 32.4 (2.5 ~ 3.3, 18.1 ~ 23.9)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
M10
1.25 (0.049)
17.7 ~ 23.5 (1.8 ~ 2.4, 13.0 ~ 17.4)
47.1 ~ 63.7 (4.8 ~ 6.5, 34.7 ~ 47.0)
69.6 ~ 94.1 (7.1 ~ 9.6, 51.4 ~ 69.4)
M12
1.25 (0.049)
32.4 ~ 44.1 (3.3 ~ 4.5, 23.9 ~ 32.5)
86.3 ~ 117.7 (8.8 ~ 12.0, 63.7 ~ 86.8)
127.5 ~ 172.6 (13.0 ~ 17.6, 94.0 ~ 127.3)
M14
1.5 (0.059)
51.0 ~ 69.6 (5.2 ~ 7.1, 37.6 ~ 51.4)
136.3 ~ 185.3 (13.9 ~ 18.9, 100.5 ~ 136.7)
201.0 ~ 271.6 (20.5 ~ 27.7, 148.3 ~ 200.4)
M16
1.5 (0.059)
79.4 ~ 107.9 (8.1 ~ 11.0, 58.6 ~ 79.6)
211.8 ~ 286.4 (21.6 ~ 29.2, 156.2 ~ 211.2)
311.8 ~ 421.7 (31.8 ~ 43.0, 230.0 ~ 311.0)
M20
1.5 (0.059)
163.8 ~ 221.6 (16.7 ~ 22.6, 120.8 ~ 163.5)
448.2 ~ 607.0 (45.7 ~ 61.9, 330.5 ~ 447.7)
639.4 ~ 864.9 (65.2 ~ 88.2, 471.6 ~ 638.0)
M24
2 (0.078)
276.5 ~ 373.6 (28.2 ~ 38.1, 204.0 ~ 275.6)
759.0 ~ 1026.8 (77.4 ~ 104.7, 559.8 ~ 757.3)
1080.7 ~ 1462.2 (110.2 ~ 149.1, 797.1 ~ 1078.4)
M30
2 (0.078)
562.9 ~ 762.0 (57.4 ~ 77.7, 415.2 ~ 562.0)
1553.4 ~ 2102.5 (158.4 ~ 214.4, 1145.7 ~ 1550.8)
2210.4 ~ 2991.0 (225.4 ~ 305.0, 1630.3 ~ 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)


Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.8 (0.031)
2.0 ~ 2.9 (0.2 ~ 0.3, 1.4 ~ 2.2)
5.9 ~ 7.8 (0.6 ~ 0.8, 4.3 ~ 5.8)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
M6
1 (0.039)
3.9 ~ 4.9 (0.4 ~ 0.5, 2.9 ~ 3.6)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
14.7 ~ 19.6 (1.5 ~ 2.0, 10.8 ~ 14.5)
M8
1.25 (0.049)
8.8 ~ 11.8 (0.9 ~ 1.2, 6.5 ~ 8.7)
24.5 ~ 32.4 (2.5 ~ 3.3, 18.1 ~ 23.9)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
M10
1.5 (0.059)
17.7 ~ 24.5 (1.8 ~ 2.5, 13.0 ~ 18.1)
48.1 ~ 65.7 (4.9 ~ 6.7, 35.4 ~ 48.5)
70.6 ~ 96.1 (7.2 ~ 9.8, 52.1 ~ 70.9)
M12
1.75 (0.068)
31.4 ~ 43.1 (3.2 ~ 4.4, 23.1 ~ 31.8)
84.3 ~ 113.8 (8.6 ~ 11.6, 62.2 ~ 83.9)
123.6 ~ 167.7 (12.6 ~ 17.1, 91.1 ~ 123.7)
M14
2 (0.078)
51.0 ~ 68.6 (5.2 ~ 7.0, 37.6 ~ 50.6)
135.3 ~ 182.4 (13.8 ~ 18.6, 99.8 ~ 134.5)
198.1 ~ 268.7 (20.2 ~ 27.4, 146.1 ~ 198.2)
M16
2 (0.078)
79.4 ~ 107.9 (8.1 ~ 11.0, 58.6 ~ 79.6)
212.8 ~ 288.3 (21.7 ~ 29.4, 157.0 ~ 212.7)
311.8 ~ 421.7 (31.8 ~ 43.0, 230.0 ~ 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
0.5 (0.019)
2.9 ~ 2.9 (0.3 ~ 0.3, 2.2 ~ 2.2)
6.9 ~ 8.8 (0.7 ~ 0.9, 5.1 ~ 6.5)
9.8 ~ 13.7 (1.0 ~ 1.4, 7.2 ~ 10.1)
M6
0.75 (0.029)
3.9 ~ 5.9 (0.4 ~ 0.6, 2.9 ~ 4.3)
10.8 ~ 14.7 (1.1 ~ 1.5, 8.0 ~ 10.8)
16.7 ~ 21.6 (1.7 ~ 2.2, 12.3 ~ 15.9)
M8
1 (0.039)
9.8 ~ 12.7 (1.0 ~ 1.3, 7.2 ~ 9.4)
26.5 ~ 35.3 (2.7 ~ 3.6, 19.5 ~ 26.0)
38.2 ~ 52.0 (3.9 ~ 5.3, 28.2 ~ 38.3)
M10
1.25 (0.049)
19.6 ~ 25.5 (2.0 ~ 2.6, 14.5 ~ 18.8)
51.0 ~ 68.6 (5.2 ~ 7.0, 37.6 ~ 50.6)
75.5 ~ 102.0 (7.7 ~ 10.4, 55.7 ~ 75.2)
M12
1.25 (0.049)
35.3 ~ 48.1 (3.6 ~ 4.9, 26.0 ~ 35.4)
94.1 ~ 126.5 (9.6 ~ 12.9, 69.4 ~ 93.3)
138.3 ~ 186.3 (14.1 ~ 19.0, 102.0 ~ 137.4)
M14
1.5 (0.059)
55.9 ~ 75.5 (5.7 ~ 7.7, 41.2 ~ 55.7)
148.1 ~ 200.1 (15.1 ~ 20.4, 109.2 ~ 147.6)
216.7 ~ 293.2 (22.1 ~ 29.9, 159.8 ~ 216.3)
M16
1.5 (0.059)
86.3 ~ 116.7 (8.8 ~ 11.9, 63.7 ~ 86.1)
229.5 ~ 309.9 (23.4 ~ 31.6, 169.3 ~ 228.6)
336.4 ~ 455.0 (34.3 ~ 46.4, 248.1 ~ 335.6)

   
1.
The torques shown in the table are standard values under the following conditions.
Nuts and bolts are made of galvanized steel bar.
Galvanized plain steel washers are inserted.
All nuts, bolts and plain washers are dry.
2.
The torques shown in the table are not applicable.
When spring washers, toothed washers and the like are inserted.
If plastic parts are fastened.
If self-tapping screws or self-locking nuts are used.
If threads and surfaces are coated with oil.
    Towing
    General Information If the vehicle needs to be towed, call a professional towing service. It is very dangerous to tow a vehicle with just a rope or chain. Emergency Towing There are three ...

    Basic Service Symbols
    General Information There are five primary symbols used to complement illustrations. These symbols indicated the materials to be applied to parts during service. SymbolMeaningDo not reuse t ...