Hyundai Elantra: Emission Control System > Evaporative Emission Control System > Fuel Tank Air 
Filter > Repair procedures - Emission Control System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Emission Control System > Evaporative Emission Control System > Fuel Tank Air Filter > Repair procedures


Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle with a jack.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the ventilation tube quick-connector (B).

5.
Remove the fuel tank air filter and canister close valve assembly (A) after rotating it as below.

6.
Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.

7.
Install a new fuel tank air filter in accordance with the reverse order.

Installation

Installation is the reverse of removal.

    Emission Control System > Evaporative Emission Control System > Fuel Filler Cap > Description and Operation
    Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...

    Emission Control System > Exhaust Emission Control System > Description and Operation
    Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, ...