Hyundai Elantra: Emission Control System > Evaporative Emission Control System > Canister > Repair 
procedures - Emission Control System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Emission Control System > Evaporative Emission Control System > Canister > Repair procedures


Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the canister close valve connector (A).
3.
Disconnect the vapor tube quick-connector (B) and the ventilation tube quick-connector (C).

4.
Disconnect the vapor tube quick-connector (A).

5.
Remove the canister assembly after removing installation bolt/nuts.

Inspection

1.
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atmosphere
B: Canister ↔ Intake Manifold
C: Canister ↔ Fuel Tank

Installation

Installation is the reverse of removal.

Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)


    Emission Control System > Evaporative Emission Control System > Repair procedures
    Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. · At Cold ...

    Emission Control System > Evaporative Emission Control System > Fuel Filler Cap > Description and Operation
    Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...