Hyundai Elantra: Adjustment - Clutch Release Cylinder. Repair procedures - Clutch System - Clutch System - Hyundai Elantra MD 2010-2018 Service manualHyundai Elantra: Adjustment


Clutch Release Cylinder Air Bleeding Procedure
Use the specified fluid. Avoid mixing different brands of fluid.

Specified fluid: SAE J1703 (DOT 3 or DOT 4)

1.
After disconnecting a cap from the clutch release cylinder air bleeder, insert a vinyl hose in the plug.
2.
Loosening the plug screw, press and release the clutch pedal about 10 times.
3.
Tighten the plug (A) during the clutch pedal pressed. Afterwards, raise the pedal with a hand.
4.
After pressing the clutch pedal 3 times more, loosen the plug (A) and retighten it with the pedal pressed. Raise it again, then.
5.
Repeat the step 4 two or three times. (until there is no bubble in the fluid)

Tightening torque:
6.8 ~ 9.8 N.m (0.7 ~ 1.0 kgf.m, 5.0 ~ 7.2 lb-ft)

6.
Refill the clutch master cylinder with the specified fluid.
    Installation
    1. Installation is the reverse of removal. Coat the clutch clevis push rod sp ...