Hyundai Elantra MD/UD: Rear Seat Belt. Repair procedures - Seat Belt - Body (Interior and Exterior) - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Rear Seat Belt. Repair procedures

Replacement

Rear Seat Belt Replacement
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the following items first.
A.
Rear seat
(Refer to the BD group- "Rear Seat")
B.
Rear pillar trim
(Refer to the BD group- "Interior Trim")
C.
Rear door scuff trim
(Refer to the BD group- "Interior Trim")
D.
Luggage partition trim
(Refer to the BD group- "Interior Trim")
E.
Rear wheel house trim
(Refer to the BD group- "Interior Trim")
F.
Package tray trim
(Refer to the BD group- "Interior Trim")
2.
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
After loosening the retractor (B) mounting bolt, then remove the rear seat belt (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Installation is the reverse of removal.
•
Replace any damaged clips.
Rear Seat Belt Replacement [Center]
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the following items first.
A.
Rear seat
(Refer to the BD group- "Rear Seat")
B.
Rear pillar trim
(Refer to the BD group- "Interior Trim")
C.
Rear door scuff trim
(Refer to the BD group- "Interior Trim")
D.
Luggage partition trim
(Refer to the BD group- "Interior Trim")
E.
Rear wheel house trim
(Refer to the BD group- "Interior Trim")
F.
Package tray trim
(Refer to the BD group- "Interior Trim")
2.
After loosening the mounting bolt, then remove the rear center seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
[A type]

[B type]

3.
After loosening the retractor (B) mounting bolt, then remove the rear center seat belt (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Installation is the reverse of removal.
•
Replace any damaged clips.
Rear Seat Belt Buckle Replacement
1.
Remove the rear seat cushion.
(Refer to the BD group - "Rear Seat")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
[LH]
(A type)

(B type)

[RH]

3.
Installation is the reverse of removal.
Front Seat Belt. Repair procedures
Replacement Front Seat Belt Replacement • When installing the belt, make sure not to damage th ...