Hyundai Elantra MD/UD: Cruise control system - Driving your vehicle - Hyundai Elantra MD 2010-2015 Owners manualHyundai Elantra MD/UD: Cruise control system

➀ CRUISE indicator

➀ CRUISE indicator
➁ SET indicator

WARNING

  • If the cruise control is left on, (CRUISE indicator light in the instrument cluster illuminated) the cruise control can be activated unintentionally. Keep the cruise control system off (CRUISE indicator light OFF) when the cruise control is not in use, to avoid inadvertently setting a speed.
  • Use the cruise control system only when traveling on open highways in good weather.
  • Do not use the cruise control when it may not be safe to keep the car at a constant speed, for instance, driving in heavy or varying traffic, or on slippery (rainy, icy or snow-covered) or winding roads or over 6% up-hill or down-hill roads.
  • Pay particular attention to the driving conditions whenever using the cruise control system.
  • Be careful when driving downhill using the cruise control system, which may increase the vehicle speed.

During cruise-speed driving of a manual transaxle vehicle, do not shift into CAUTION

During cruise-speed driving of a manual transaxle vehicle, do not shift into neutral without depressing the clutch pedal, since the engine will be overrevved. If this happens, depress the clutch pedal or release the cruise control ONOFF switch.

NOTICE

During normal cruise control operation, when the SET switch is activated or reactivated after applying the brakes, the cruise control will energize after approximately 3 seconds. This delay is normal.

Malfunction indicator
The VSM can be deactivated even if you don’t cancel the VSM operation by pressing the ESC OFF button. It indicates that a malfunction has been detected somewhere in the Electric Power Steering s ...

To set cruise control speed:
1. Push the cruise ON-OFF button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which must ...