Hyundai Elantra HD: Turn Signal Lamp. Repair procedures
Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Loose the screws (3EA) holding the rear combination
lamp then disconnect the 4P connector then remove the outside rear combination
lamp.
|
| 3. |
Replace the bulbs (2EA) after disconnecting the rear
combination lamp assembly.
|
| 4. |
Disconnect the lamp cover on trunk. Remove the lamp
assembly after loosening the connector (4pin), Cap nuts (2EA) and bolts
(2EA).
|
| 5. |
Remove the trunk combination lamp assembly and replace
the bulb.
|
Installation
| 1. |
Install the trunk combination lamp assembly after
assembling the bulb.
|
| 2. |
Install the lamp cover to the trunk after connecting
the lamp connector.
|
| 3. |
Install the rear combination lamp assembly after
assembling the bulbs after connecting the lamp connector.
|
