Hyundai Elantra HD: Specifications - General Information - Engine Electrical System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Specifications

Specification

Ignition System
Items
Specification
Ignition coil
Primary resistance
0.58 ± 10 % (Ω)
Secondary resistance
8.8 ± 15 % (kΩ)
Spark plugs
Unleaded
NGK
IZFR5L-11
Gap
1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)

Starting System
Items
Specification
Starter
Rated voltage
12 V, 1.2 kW
No. of pinion teeth
8
No-load characteristics
Voltage
11 V
Ampere
90A, MAX
Speed
2,800 rpm, MIN

Charging System
Items
Specification
Alternator
Rate voltage
13.5 V, 90A
Speed in use
1,000 ~ 18,000 rpm
Regulator setting voltage
14.4 ± 0.1 V
Temperature compensation
-3.5 ± 2 mV / °C
Battery
Type
48-23GL
Cold cranking amperage [at -18°C(-0.4°F)]
550 A
Reserve capacity
92 min
Specific gravity [at 20°C(68°F)]
1.280 ± 0.01

COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C(80.1°F).

Auto Cruise Control System
Items
Specification
Actuator

Rated voltage range
DC 12V
Operating voltage range
DC 11 ~ 16V
Operation temperature rnage
-30 ~ 100°C (22 ~ 212°F)
Cruise main switch

Reted voltage
DC 5V
Operating temperature range
-30 ~80 °C (-22 ~ 176°F)

Tightening Torques
Items
N.m
kgf.m
lb-ft
Ignition coil mounting
Stater terminal mounting
Stater mounting
Alternator mounting A
Alternator mounting B
18.6 ~ 26.5
9.8 ~ 11.8
42.2 ~ 53.9
11.8 ~ 14.7
19.6 ~ 24.5
1.9 ~ 2.7
1.0 ~ 1.2
4.3 ~ 5.5
1.2 ~ 1.5
2.0 ~ 2.5
13.7 ~ 19.5
7.2 ~ 8.7
31.1 ~ 39.8
8.7 ~ 10.8
14.5 ~ 18.1


Troubleshooting
Troubleshooting Ignition System Trouble condition Probable cause Remedy Engine cranks, but will not start or is hard to start. Ignitio ...