Hyundai Elantra MD/UD: Removal - Repair procedures - Ignition Switch Assembly - Body Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Remove the steering column upper and lower shrouds.
(Refer to the BD group - "Crash pad")
4.
Remove the wiper switch.
(Refer to the BE group - "Multifunction switch")
5.
Remove the ignition switch after disconnecting the ignition switch 6P connector.
6.
Remove the key warning/immobilizer connector (A).

7.
After loosening the screw, remove the key warning switch and key Illumination (B).
8.
Pushing lock pin with key ACC.
9.
Remove the key lock cylinder (A).


Installation
1. Install the key lock cylinder. 2. Install the key warning switch and key Illumination. 3. Install the key wa ...