Hyundai Elantra MD/UD: Removal - Room Lamp. Repair procedures - Lighting System - Body Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

Room Lamp
1.
Disconnect the negative(-) battery terminal.
2.
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver.

3.
Replace the bulbs (B) and remove the screws if it is necessary.
4.
Remove the room lamp assembly (A) after disconnecting the connector.

Vanity Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the vanity lamp (A) by pressing the clip with a small screwdriver.

3.
Remove the vanity lamp assembly after disconnecting the connector.

Inspection
Room Lamp 1. Check that the switch operates properly after disconnecting the room lamp connector (A). ...

Installation
Room Lamp 1. Reconnect the connector. 2. Install the room lamp assembly. 3. Install the lens. ...