Hyundai Elantra MD/UD: Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
To remove the seat belt anchor pretensioner (C), keep on pushing
the lock pin (A) as arrow direction. And then remove the seat belt after
pushing the lock pin (B).
|
| 3. |
Remove the door scuff trim.
(Refer to the Body group - "Interior trim")
|
| 4. |
Remove the center pillar trim.
(Refer to the Body group - "Interior trim")
|
| 5. |
Disconnect the anchor pretensioner connector (A).
|
| 6. |
Loosen the anchor pretensioner mounting bolt (B) and remove the
anchor pretensioner.
|
