Hyundai Elantra: Removal - Variable Intake Solenoid (VIS) Valve. Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra: Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the variable intake solenoid valve connector (A).
3.
Disconnect the vacuum hoses (B) from the valve.
4.
Remove the installation nut, and then remove the valve from the surge tank.

    Inspection
    1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

    Installation
    • Install the component with the specified torques. • ...