Hyundai Elantra MD/UD: Removal - Engine Coolant Temperature Sensor (ECTS). Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the engine coolant temperature sensor connector (A).
3.
Remove the sensor (B).

Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
4.
Supplement the engine coolant (Refer to “Cooling System” in EM group).

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS. 4. ...

Installation
• Install the component with the specified torques. • ...