Hyundai Elantra MD/UD: Rear Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always position the vehicle
on a level surface.
Prior to inspection, make sure that the rear suspension system
is in normal operating condition and that the tires are inflated to
the specified pressure.
|
Toe
B - A. 0: Toe in (+)
B - A < 0: Toe out (-)
|
Toe is pre-set at the factory, so it does not need to be adjusted. If
the toe is not within the standard value, replace or repair the damaged parts
and then inspect again.
Toe:
Total : lL-Rl≤0.23°
Individual : 0.25°(+0.2°/ -0.15°)
|
l L - R l means deviation of the left and right individual toe
values.
L : Left toe value
R : Right toe value
|
Camber
Camber is pre-set at the factory, so it does not need to be adjusted.
If the camber is not within the standard value, replace or repair the damaged
parts and then inspect again.
Camber: -1.5°±0.5°
|
