Hyundai Elantra HD: Rear Trailing Arm. Repair procedures - Rear Suspension System - Suspension System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Rear Trailing Arm. Repair procedures

Removal

1.
Remove the rear wheel & tire.
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Disconnect the parking brake cable (A) with the rear brake assembly.

3.
Remove the parking brake cable bracket from the trailing arm by loosening the mounting bolt (A).
4.
Disconnect the rear stabilizer link with the trailing arm by loosening the nut (B).

5.
Disconnect the trailing arm (B) with the carrier assembly by loosening mounting bolts (A).

6.
Remove the rear trailing arm (B) by loosening the mounting bolts (A).


Inspection

1.
Check the bushing for wear and deterioration.
2.
Check the rear trailing arm for deformation.
3.
Check for all bolts and nuts.

Instllation

1.
Install the rear trailing arm (A) to the body by tightening the mounting bolts (B).

Tightening torque :
140 ~ 160N.m (14.0 ~ 16.0kgf.m, 101 ~ 116lb-ft)

2.
Connect the trailing arm (B) with the carrier assembly by tightening the bolts (A).

Tightening torque :
35 ~ 55N.m (3.5 ~ 5.5kgf.m, 25 ~ 40lb-ft)

3.
Connect the parking brake cable (A) with the rear brake assembly.

4.
Connect the rear stabilizer link with the trailing arm and then tighten the nut (B).

Tightening torque :
45 ~ 55N.m (4.5 ~ 5.5kgf.m, 30 ~ 40lb-ft)

5.
Install the parking brake cable bracket to the trailing arm by mounting bolt (A).

6.
Install the rear wheel & tire.

Tightening torque :
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)

Be careful not to damage to the hub bolts when installing the rear wheel& tire.

Rear Stabilizer Bar. Components and Components Location
Component Location 1. Rear stabilizer link 2. Mounting bracket 3. Bushing 4. Rear stabilizer bar ...