|
1. |
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
|
In order to protect the wheel speed sensor, when measuring
output voltage, a 100 Ω resister must be used as shown.
|
|
|
2. |
Compare the change of the output voltage of the wheel speed sensor
to the normal change of the output voltage as shown below.
V_low : 0.59V ~
0.84V
V_high : 1.18V
~ 1.68V
Frequency range :
1 ~ 2,500Hz
|
|
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Description
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate electronically by the vibration change of plate
fork inside the yaw rate sens ...
Hyundai Elantra MD/UD: Inspection
