Hyundai Elantra: Inspection - Thermostat. Repair procedures - Cooling System - Engine Mechanical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra: Inspection

1.
Immerse the thermostat in water and gradually heat the water.

2.
Check the valve opening temperature.
If the valve opening temperature is not as specified, replace the thermostat.

Valve opening temperature:
88 ± 1.5°C (190.4 ± 34.7°F)
Full opening temperature: 100°C (212°F)

3.
Check the valve lift.
If the valve lift is not as specified, replace the thermostat.

Valve lift : 8 mm (0.3 in.) or more at 100°C (212°F)


    Removal and Installation
    Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the thermostat, e ...

    Thermostat. Troubleshooting
    Troubleshooting Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket ...