Hyundai Elantra MD/UD: Disassembly - Starter. Repair procedures - Starting System - Engine Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Disassembly

1.
Disconnect the M-terminal (A) on the magnet switchassembly.

2.
After loosening the 2 screws (A), detach the magnetswitch assembly (B).

3.
Loosen the brush holder mounting screw (A) and the trough bolts (B).

4.
Remove the rear bracket (A) and brush holderassembly (B).

5.
Remove the yoke (A).

6.
Remove the packing (A), lever plate (B), lever (C), armature (D).

7.
Press the stopper (A) using a socket (B).

8.
After removing the stop ring (A) using stopper pliers (B).

9.
Remove the stop ring (B), stopper (A), overrunningclutch (C) and armature (D).

Using a suitable pulling tool (A), pull the overrunningclutch stopper (C) over the stop ring (B).


Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

Reassembly
1. Reassemble in the reverse order of disassembly. ...