Hyundai Elantra: Disassembly - Alternator. Repair procedures - Charging System - Engine Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra: Disassembly

1.
Remove the rear cover (A) after removing nuts (B).
2.
Remove the mounting bolts (A) and the regulator assembly (B).
3.
Remove the slip ring guide (A) after pulling it.
4.
Remove the OAD(Overrunning Alternator Decoupler) cap.
•
When installing, replace with new OAD cap.
5.
Remove the OAD(Overrunning Alternator Decoupler) pulley (A) using the special tool.
6.
Unsolder the 3 stator leads (A).
7.
Remove the 4 through bolts (A).
8.
Disconnect the rotor (A) and housing (B).

    Intallation
    1. Install in the reverse order of removal. Adjust the alternator belt tension ...

    Reassembly
    1. Reassemble in the reverse order of disassembly. • ...