Hyundai Elantra: Adjustment - Shift Lever. Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra: Adjustment

Adjusting method for T/M control cable
1.
Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
2.
Commect room side lever (A) and control cable (B).
3.
Push cable to "F" direction shown to eliminate FREE PLAY.
4.
Tighten adjusting nut (A).
Tightening torque:
9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

5.
After adjusting, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of room lever.
    Installation
    1. Installation is the reverse of removal. Make sure vehicle does not roll bef ...

    Driveshaft and axle
    h4 {color:#800000} h3 {color:#0033CC} h2 {color:#008000} h1 {color:#FF0000} ...